Datasheet

ManualsBrandsAnderson Power Products ManualsConnectorsHandle Kit, Red

www.andersonpower.com

- 57 -

All Data Subject To Change Without Notice

50 Standard Housings

The smallest SB

housings work with wire contacts up to

6 AWG [10 mm²] as well as PCB, and busbar contacts.

Genderless design mates with itself. Mechanical keys are

color coded.

Description ---- Part Numbers ----

Minimum Quantity .... 500 100 ...

Yellow 992G5-BK 992G5

Orange 992G7-BK 992G7

Red 992G1-BK 992G1

Gray 992-BK 992

Blue 992G4-BK 992G4

Green 992G6-BK 992G6

Black 992G2-BK 992G2

NOTE: SB

50 Black and Gray housings have the

same keying features and can be intermated.

50 Chemical Resistant Housings

Same features as the Standard SB

50 but molded in a

chemical resistant PBT/ PC blend. Suitable for use to -40°C.

Description ---- Part Numbers ----

Minimum Quantity .... 500 100 ...

Red P992G1-BK P992G1

Gray P992-BK P992

Black P992G2-BK P992G2

NOTE: SB

50 Black and Gray housings have the

same keying features and can be intermated.

50 Connectors

- up to 120 amps

| SB50

ORDERING INFORMATION |

Based off the design pioneered by Anderson in 1953,

APP

’s two pole SB

connectors set the standard for

DC power distribution and battery connections. SB

connectors feature a one piece plastic housing using

stainless steel springs to hold low resistance contacts in

place. Wires sizes from #16 (1.5 mm²) to #6 (13.3 mm²)

are held in the smallest of the SB

series housings.

• Low Resistance Silver or Tin Plated Copper Contacts

Allows UL rated currents up to 120 amps

• UL Rated for Hot Plugging up to 50 Amps

Great for battery or other applications where the ability to

interrupt circuits is required

• Wire, PCB, and Busbar Contacts

Allows one connection system to meet multiple needs

SECTION 3

[ 81.3 ]

3.20

[ 3.7 ]

Ø 0.14

(2) PLC’S

[ 15.9 ]

0.63

Material ID

[ 35.1 ]

1.38

[ 22.5 ]

0.89

[ 19.1 ]

0.75

[ 6.4 ]

0.25

Bottom View

Mated Length

P = Chemical Resistant

Summary of content (6 pages)

PAGE 1
SB® 50 Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP®’s two pole SB® connectors set the standard for DC power distribution and battery connections. SB®50 connectors feature a one piece plastic housing using stainless steel springs to hold low resistance contacts in place. Wires sizes from #16 (1.5 mm²) to #6 (13.3 mm²) are held in the smallest of the SB® series housings.
PAGE 2
SB®50 Silver Plated Wire Contacts Use two silver plated contacts per housing for the best electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wires. Dimensions Mating Loose Piece -AAWG mm² Force --- Part Numbers --inches mm Minimum Quantity ................... 1,000 100 ......................... 6 13.3 Low 1307-BK 1307 0.22 5.59 6 13.3 High 5900-BK 5900 0.22 5.59 8 8.4 High 5952-Bk 5952 0.19 4.83 12 to 10 3.3 to 5.
PAGE 3
[ 12.2 ] 0.48 55A Vertical Mini Powerclaw PCB Contacts Vertical Mini Powerclaw contacts save space by not requiring a SB®50 housing on the PCB side. The guide housing is required for to provide a polarized connection. (See SB®50 accessories). [ 6.25 ] 0.246 [ 24.3 ] 0.96 [ 9.7 ] 0.38 Description - Loose Piece Part Numbers Minimum Quantity .... 1,500 100 ......... Tin Plated PC5933T-BK PC5933T Silver Plated PC5933S-BK PC5933S [2.32] 0.091 [ 10.29 ] 0.405 [ 1.27 ] 0.050 [ 4.98 ] 0.
PAGE 4
| SB®50 CONNECTOR TEMPERATURE CHARTS | SB®50 Temperature Rise at Constant Current 60 125 Temperature (°C) Temperature (°C) 50 40 30 20 SB®50 Derating vs.
PAGE 5
Dust Cover Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Description ---- Part Numbers ---Minimum Quantity .............................. 500 50 ... Dust Cover with Lanyard Strap, Red 113890P1 134G1 NEW Slide cover over mating end. SB® Environmental Boots SB® Environmental Boots provide water, dirt, chemical and UV protection for SB®50 connectors.
PAGE 6
SB® - Tooling Information Wire Size AWG mm² Loose Piece Part Numbers Silver Plating Loose Piece Contact Crimp Tools Hand Tool Pneumatic Bench Tool Die Locator Number of Crimps 1389G6 Single 1389G4 Single SB50 #6 13.3 #8 8.4 #10 / 12 5.3 / 3.3 1307 1388G6 5900 5952 1309G4 1387G1 5953 1388G7 5915 SB120 #1 42.4 #2 33.6 1319 #4 21.2 1319G4 #6 13.3 1319G6 1388G3 1323G1 1368 Series 1387G1 1388G4 SB175 1382 #1 42.4 1347 #2 33.6 1383 #4 21.1 1384 #6 13.