Datasheet

www.andersonpower.com
- 59 -
All Data Subject To Change Without Notice
55A Vertical Mini Powerclaw PCB Contacts
Vertical Mini Powerclaw contacts save space by not requiring a SB
®
50
housing on the PCB side. The guide housing is required for to provide a
polarized connection. (See SB
®
50 accessories).
Description - Loose Piece Part Numbers -
Minimum Quantity .... 1,500 100 .........
Tin Plated PC5933T-BK PC5933T
Silver Plated PC5933S-BK PC5933S
| SB
®
50 CONNECTOR SPECIFICATIONS |
SECTION 3 SB
®
50
[ 12.2 ]
0.48
[ 24.3 ]
0.96
[ 9.7 ]
0.38
[2.32]
0.091
[ 10.29 ]
0.405
[ 6.25 ]
0.246
[ 1.27 ]
0.050
[ 4.98 ]
0.196
Electrical
Current Rating Amperes¹ UL 1977 CSA
Wire to Wire UL 1977 (6 AWG) 120 50
Wire to PCB UL 1977 (6 AWG) 50
Voltage Rating AC/DC
UL 1977 600
PCB Connector Recommended Voltage
per IEC 60950-1 Table 2L Pollution Degree
2
Mini Vert. Contact 522
Mini Horiz. Contact 504
Standard Contact 950
Dielectric Withstanding Voltage
Volts AC 2,200
Avg. Mated Contact Resistance Milliohms¹
1 1/4” of #6 AWG wire 0.200
PCB Contact to Contact 0.500
UL Hot Plug Current Rating Amperes - 250 cycles at 120V DC
Wire- wire 50A
PCB- wire 40A
(Vertical Mini Powerclaw)
Mechanical
Wire Size Range AWG mm²
Wire Contacts with Bushings 16 to 6 1.3 to 13.3
Max. Wire Insulation Diameter in. mm
0.440 11.200
Operating Temperature² °F °C
Standard -4° to 221° -20° to 105°
Chemical Resistant* -40 to 221° -40° to 105°
*Chemical resistant material not available for PCB guide housings
Mating Cycles No Load by Plating Silver (Ag) Tin (Sn)
Wire and PCB Contacts 10,000 1,500
Avg. Mating / Unmating Force Lbf. N
Wire to Wire Low Force Contacts 10 44
Wire to Wire High Force Contacts 15 67
Standard Powerclaw to Wire 15 66
Mini Powerclaw to Wire 8 36
PCB Specications
Mounting Style Plated Through Hole
Max PCB Thickness- in. [mm] Standard: 0.15 [0.381]
Mini: 0.25 [0.635]
Recommended Traces #8 AWG Cross Section
Min. Contact / Spring Retention Force Lbf. N
Wire Housing 50 222
Min. Creepage / [Clearance] Distance in. mm
Standard Powerclaw 0.374 9.5
Mini Vert. Powerclaw 0.213 5.4
Mini Horz. Powerclaw 0.205 5.2
Mechanical Shock
4
MIL-STD-202 213 Condition A 50g’s
Vibration High Frequency
4
MIL-STD-202 204 Condition A 10g’s
Materials
Housing
Standard Plastic Resin Polycarbonate
Chem. Resistant Resin Polycarbonate / PBT blend
Contact Retention Spring Stainless Steel
Housing Flammability Rating
UL94 V-0
Contact
Base Copper Alloy
Wire Plating Silver
PCB Plating Sn or Ag over Ni
Contact Termination Methods
Crimp³ Wire Contacts
Hand Solder Wire and PCB Contacts
Solder Dip* PCB Contacts
Wave Solder* PCB Contacts
Wrench / Socket Busbar Contacts
¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP
®
recommended tooling, and a 25°C ambient temperature. UL rating not to exceed
the maximum operating temperature. CSA rating below a 30°C temperature rise.
² Limited by the thermal properties of the connector plastic housing.
³ Use APP
®
recommended tooling only. Alternate tools may adversely affect the
performance of our connectors along with UL and CSA recognition.
4
Tested with contact part number 5900.
Protection
Touch Safety with Wire Contacts
IEC 60529 IP10