Datasheet
www.andersonpower.com
- 28 -
All Data Subject To Change Without Notice
| Powerpole
®
15-45 Accessories |
[ 16.6 ]
0.655
[ 7.9 ]
0.312
[ 4.6 ]
0.180
Mounting Wings
[ 16.6 ]
0.655
[ 7.9 ]
0.312
[ 24.6 ]
0.968
[ 7.9 ]
0.312
[ 16.6 ]
0.655
[ 7.9 ]
0.312
Short with Hole Short without Hole Long
2 or 4 Pole 3 or 6 Pole 4 or 8 Pole
A
B
SECTION 2
Powerpole
®
PP15 to 45
Mounting Wing
Secure dovetailed Powerpole
®
15-45 series housings by passing fasteners through the wings
in either a horizontal or vertical orientation. Useful for sheet metal panels, printed circuit boards,
and many other mounting surfaces. Fasteners not included.
Description ------- Part Numbers -------
Minimum Quantity ... 2,500 100 ....
Red 1399G9-BK 1399G9
Blue 1399G8-BK 1399G8
Spacer
Used to separate housings under high power to minimize derating. They are
recommended for squaring off a block of Powerpole
®
15-45 housings for use in connector shells
and mounting clamps. Use a combination of long and short spacers opposite each other in a
mated block to add keying features or use two short spacers to avoid interference. Spacers with
holes can also be used to fasten the blocked housings to a surface with a fastener.
Description ------ Part Numbers -------
Minimum Quantity ..... 2,500 100 .....
Red, Short w/ Hole 1399G1-BK 1399G1
Red, Long 1399G2-BK 1399G2
Red, Short 1399G6-BK 1399G6
Black, Long 1399G10-BK 1399G10
Blue, Short 1399G13-BK 1399G13
White, Short w/ Hole 1399G14-BK 1399G14
White, Long 1399G17-BK 1399G17
Retaining Pins
Keep stacked Powerpole
®
15-45 series housings from separating. Retaining pins are inserted in
the circular opening between two housings stacked side by side.
Dimensions
- A - - B -
Description ----- Part Numbers ----- inches mm inches mm
Minimum Quantity ... 1,000 100 ............................................................................
1 Block High H1507P38 110G16 0.094 2.390 0.250 6.350
2 Block High 111812P5 110G17 0.099 / 0.106 0.251 / 2.69 0.440 11.180
Mounting Clamp
Mounting clamps can be used for fastening a block of Powerpole
®
15-45 series
housings to a panel. Connector blocks must be a complete square for the clamps
to work properly. Fastening hardware not included.
Description -- Part Numbers --
Minimum Quantity ... 100 sets of 2 .....
2 or 4 Pole 1462G1
3 or 6 Pole 1462G2
4 or 8 Pole 1462G3










