Datasheet

www.andersonpower.com
- 23 -
All Data Subject To Change Without Notice
Powerpole
®
Pak connector shells enclose stacked
groupings of PP15-45 sized housings in a durable black
shell for a nished connector appearance and additional
features. Inline, panel mount, and blindmate congurations
are available. Plug shells offer the option of integral latches
and strain relief to help secure your connection.
• Package Groupings of PP15-45 Connectors
Provides a nished appearance while protecting the individual
connectors with an outer shell
• Inline, Panel Mount, “T” or Blindmate Congurations
Allows one connection system to meet multiple needs
• Optional Latching and Strain Relief
Secures your connection and wires
| Powerpole
®
Pak ORDERING INFORMATION |
Plug Shell without Latch
Can mate inline with other plug shells with or without latches, or mate to a panel
mount receptacle. For use with Powerpole
®
wire connectors only. Cable Clamp
and Hardware Pak or Retaining Pins must be ordered separately.
Dimensions
- A -
Description -------------- Part Numbers -------------- inches mm
Minimum Quantity ... 1,000 500 25 .............................
Black, 2-4 Poles 1461G1-BK - 1461G1 1.24 31.50
Black, 5-6 Poles - 1461G2-BK 1461G2 1.56 39.62
Black, 7-8 Poles - 1461G3-BK 1461G3 1.87 47.50
For environmentally sealed connector shells to hold Powerpole
®
15-180 connectors, see APP
®
’s SPEC Pak
®
product series on our
website, www.andersonpower.com
Snap-in
T-Pak
Plug shell
without latch
Plug shell
with latch
Blindmate
Powerpole
®
Pak Connectors
- PP15 to PP45
Powerpole
®
housings and contacts are sold separately.
See page 20 for ordering information.
SECTION 2 Powerpole
®
Pak
A
Retaining Pin
[ 53.09 ]
2.09
[ 21.59 ]
0.85
[ 49.28 ]
1.94
Side View Top View
Max wire O.D. for 2-4 pole plug shells is 0.60 inches [15.2mm²].
For all other plug shells is 0.63 inches [ 16.0 mm²].
Side View
Top View
C
D
B
Retaining Pin
[ 21.59 ]
0.85
NOTE: Retaining pins are used to secure and position
Powerpoles
®
in one of three positions in plug shells.
Plug Shell with Latch
Can mate inline with other plug shells without latches, or mate to a panel mount receptacle. For use
with Powerpole
®
wire connectors only. Cable Clamp and Hardware Pak or Retaining Pins must
be ordered seperately.
Dimensions
- B - - C - - D -
Description ------------- Part Numbers -------------- inches mm inches mm inches mm
Minimum Quantity ..... 1,000 500 25 ................................................................................
Black, 2-4 Poles 1460G1-BK - 1460G1 1.94 49.28 2.25 57.15 1.24 31.50
Black, 5-6 Poles - 1460G2-BK 1460G2 1.94 49.28 2.25 57.15 1.56 39.62
Black, 7-8 Poles - 1460G3-BK 1460G3 1.94 49.28 2.25 57.15 1.87 47.50
Black, 9-10 Poles - 1460G4-BK 1460G4 2.51 63.75 2.82 71.63 1.84 46.74