Instructions / Assembly

4-Panel Door Installations

Install second Operating Panel immediately after

ﬁrst. Operating Active Panels will need to be held in

place until Inside Head Stop is reattached.

9. Install Operating Panel

8. Remove Inside Head Stop

Inside Head Stop

Screw

Interior View

Head Jamb

• Remove the (2) screws holding Inside Head Stop to

the Head Jamb. Save screws for reinstallation of

Inside Head Stop.

• Lift the Operating Panel into the frame from the interior

and position the Rollers on top of the Sill Rib. Tip the

top of the Operating Panel in, slide panel closed, and

hold in position until Inside Head Stop is reattached.

Interior View

Sill Rib

Operating Panel

Windows and doors can be heavy. Use safe lifting

techniques and a reasonable number of people with

enough strength to lift, carry and install window and

door products to avoid injury and/or product damage.

Support Operating Panel(s) in frame at all times until

Head Stop is attached in Step 8. Failure to do so

could result in the panel falling out causing personal

injury, property and/or product damage.

Panel proﬁle varies by product line.

Frenchwood

Patio Door shown.

Panel proﬁle varies by product line.

Frenchwood

Patio Door shown.

Panel Assembly and Installation