Instructions / Assembly

Bottom Edge of
Interlock Weatherstrip
Flush with Bottom Edge
of Operating Panel
1/2"
Exterior Edge
Painted #7 x 5/8"
Pan Head Screw
Top Edge
• Place Operating Panel exterior side up on a
clean flat work surface.
• Apply a 1/8" bead of Sealant 3" up vertical
edge of panel and 1/2" across bottom edge
of panel, opposite side of handle holes as
shown.
• Position Operating Panel Interlock
Weatherstrip on the exterior edge of
Operating Panel, opposite the side with handle
holes and flush with the bottom edge of door.
• Hold Operating Panel Interlock Weatherstrip
firmly in place and drill 1/16" holes, 3/8"
deep, through prepunched holes into
Operating Panel.
• Fasten Operating Panel Interlock Weatherstrip
with Painted #7 x 5/8" Pan Head Screws
provided.
Right Operating Panel
Left Operating Panel
Handle Holes
Operating Panel
Interlock Weatherstrip
Exterior Edge
Operating Panel Interlock Weatherstrip
Operating Panel
Interlock Weatherstrip
Handle Holes
Sealant
3"
7. Attach Operating Panel Interlock Weatherstrip
•
•
•
•
Weatherstrip Side
Exterior Edge
Panel profile varies by product line.
Frenchwood
®
Patio Door shown.
Exterior View
Panel Assembly and Installation
8