Instructions / Assembly

Black Foam Plug
Stationary Panel
Interlock Weatherstrip
Stationary Panel
Stationary Panel
Interlock Weatherstrip
Black Foam Plug
#7 x 5/8" Painted
Flat Head Screw
Stationary Panel
Flexible Lip
Sealant
Sill Filler Flange
Sill
5. Install Stationary Panel Interlock Weatherstrip
Black Foam Plug
Stationary Panel Interlock Weatherstrip
Silicone Sealant
3"
Sill Filler
Sill Filler Flange
•
• Apply a 1/8" bead of Sealant, up the vertical edge of
Stationary Panel, starting at the bottom edge of the
panel as shown.
Interlock Weatherstrip must contact black Foam
Plug at top of unit and black Foam Plug on bottom
of unit to achieve a weathertight seal. Failure to do
so may result in water infiltration and product or
property damage.
• Position Stationary Interlock Weatherstrip on the
interior edge of the Stationary Panel as shown.
Ends of Stationary Interlock Weatherstrip must be in
contact with black Foam Plugs located at the Head
and Sill.
• Hold Stationary Interlock Weatherstrip tight to
Stationary Panel edge and drill 1/16", 3/8" deep,
into Stationary Panel using Stationary Interlock
Weatherstrip as a guide.
• Fasten weatherstrip to Stationary Panel using Painted
#7 x 5/8" Flat Head Screws.
• For Perma-Shield
®
and PG Upgrade Perma-Shield
®
Gliding Patio Doors, proceed to Step 7.
Perma-Shield
®
Gliding Patio Door
Frenchwood
®
, Narroline
®
, PG Upgrade
Perma-Shield
®
Gliding Patio Doors
Head
Interior View
Interior View
Interior View Interior View
Panel Assembly and Installation
6