Instructions / Assembly

Gray #8 x 1" Flat
Head Screws
Sill Filler Flange
Sill Filler
Exterior View
Parting Stop
Insect
Screen
Channel
Stationary
Panel
Sill Filler
Flexible Lip
Sill
Filler
Flange
Stationary Panel
• From the exterior, lift the Stationary Panel and insert
top between Insect Screen Guide and Parting Stop.
• Set bottom of Stationary Panel onto Sill Filler making
sure it rests tightly against the Flexible Lip.
• Slide Stationary Panel sideways into side jamb
pocket until panel is flush with end of Sill Filler and
the predrilled holes in panel line up with holes in
Sill Filler Flange.
• For Perma-Shield
®
Gliding Patio Doors only, Drill
1/16" pilot holes, 1" deep into Stationary Panel through
existing holes into Sill Filler Flange.
• Fasten with Gray #8 x 1" Flat Head Screws.
Exterior View
Windows and doors can be heavy. Use safe lifting
techniques and a reasonable number of people with
enough strength to lift, carry and install window and
door products to avoid injury and/or product damage.
1. Install Stationary Panel (Frenchwood
®
, Narroline
®
, or PG Upgrade Perma-Shield
®
Gliding Doors only)
Panel Assembly and Installation
4