Instructions / Assembly

2" x 4"
Windows and doors can be heavy. Use safe lifting
techniques and a reasonable number of people with
enough strength to lift, carry and install window and
door products to avoid injury and/or product damage.
1. Install Stationary Panel (Perma-Shield
®
Gliding Doors only)
• From the exterior, lift the Stationary Panel and insert
top between Insect Screen Guide and Parting Stop into
operating side of frame.
• Set bottom of Stationary Panel onto Sill and slide
sideways, over Sill Guide toward Stationary Side Jamb.
• Place a 2" x 4" wedge into opening to force Stationary
Panel into Stationary Side Jamb. Use wood blocking at
each end of wedge to protect unit.
• Check position of Stationary Panel by aligning with
scribe mark on Sill.
• Drill 1/16" holes 3/8" deep into Stationary Panel, using
holes in stationary Sill Insert as a guide.
• Fasten using Grey #8 X 1" Screws provided.
Exterior View
Parting Stop
Insect Screen Guide
Stationary
Panel
Sill Guide
Scribe Mark
Stationary Panel
Sill
Wood
Block
Stationary Panel Installation for Frenchwood
®
,
Narroline
®
, or Perma-Shield
®
PG Upgrade Gliding
Patio Doors, proceed to Page 4.
Grey
#8 x 1" Screw
Stationary Panel
Exterior View
Sill Insert
Wood
Block
Exterior View
Interior View
Stationary Panel
Panel Assembly and Installation
3