Instructions / Assembly

• DO NOT expose unﬁnished wood to high moisture conditions, excessive heat or humidity. Finish interior

wood surfaces immediately after installation. Unﬁnished wood surfaces will discolor, deteriorate and/or may

bow and split.

• DO NOT stain or paint weatherstrip, silicone beads, vinyl, glass or hardware.

MAINTENANCE

Immediately sand and reﬁnish any interior wood that becomes stained or mildewed to prevent further

discoloration and/or damage. For further information, contact your local Andersen

dealer. Dealers can be found

in the Yellow Pages under Windows.

Finishing, Cleaning, and Maintenance Instructions (Frenchwood® and Narroline® Patio Doors only)

Acid solutions used to wash masonry will damage glass, fasteners, hardware, and metal ﬂashing. Follow the acid

solution manufacturer's instructions carefully. Protect and/or cover Andersen

products during cleaning process

to prevent acid contact. If acid does come in contact with unit, immediately wash all surfaces with clean water.

CLEANING

Clean exterior frame, panel members, and insect screens using a mild detergent-and-water solution and a soft

cloth or brush. DO NOT use abrasive cleaners or solutions containing corrosive solvents. For persistent dirt or

grime, use a nonabrasive cleanser or a mixture of water and alcohol or ammonia.

INTERIOR FINISHING

Read and follow ﬁnishing manufacturer’s instructions and warnings on each container of ﬁnish material for

priming, painting, staining and varnishing.

Panel Assembly and Installation