Instructions / Assembly

Head Stop
12. Apply Wood Trim and Hardware (Frenchwood
®
and Narroline
®
Patio Doors only)
• Position Operating Panel Wood Trim Piece to
weatherstrip side of Operating Panel, top edge should
be flush.
• Fasten using 4d 1-1/2" finish nails. Predrilling 3/64",
1-1/2" deep is recommended.
• Position Stationary Panel Side Jamb Wood Trim
Piece to stationary side jamb, bottom of wood trim is
notched to match sill.
• Fasten using 4d 1-1/2" finish nails. Predrilling 3/64",
1-1/2" deep is recommended.
• Install Head Jamb Casing no lower than 1/8"
below head jamb to assure future panel removal
is possible.
Head Jamb Casing
1/8"
Head Jamb
Inside Head Stop
Attach Stationary
Panel Wood Trim
Piece to Frame
Side Jamb
Operating Panel Wood Trim Piece
Attach to Door Stile (flat side)
Interior View
Panel profile varies by product line.
Frenchwood
®
Patio Door shown.
Panel Assembly and Installation
11