Instructions / Assembly

7
Tools needed:
7. INSTALL SCREW COVERS
LEFT hINGE - ExTERIOR VIEWS
In this step, you will install the screw
covers over the mounting screws in the
rails and rain cap.
Starting with the rain cap screw
cover, insert a groove in the screw
cover into the bottom track of the
rain cap (Figure 22).
Snap the groove in the top of the
screw cover into the top track of the
rain cap (Figure 23).
Repeat Steps 1 and 2 to install the
remaining side screw covers. Trim
off any excess material.
1.
2.
3.
RIGhT hINGE - ExTERIOR VIEWS
You can match your Andersen storm door lock to Schlage® or Kwikset® entry door locks. See handle set instructions contained within handle set box for
details.
“Kwikset” is a registered trademark of Newfry LLC. “Schlage” is a registered trademark of Schlage Lock Company.
BEFORE
AFTER
Figure 22 Figure 23
1
1
9
9
BEFORE
AFTER
Figure 22
Figure 23
1
1
9
9
6. INSTALL hANDLE SET
Refer to the instructions included in the handle set box to install the door handles.1.
In this step, you will install the handle set.