User's Manual

5
9139831
7
Interior
8
Interior
Verify panel surface is clean and dry. Position VeriLock assembly on the panel over the lock actuator as shown. The indicator will illuminate for one (1)
second when the sensor is applied to the panel as the anti-tamper switch is depressed.
Verify panel surface is clean and dry. Position assembly on the panel over the lock actuator as shown. The indicator will illuminate for one (1) second
when the sensor is applied to the panel as the anti-tamper switch is depressed.
Rotate VeriLock assembly to the correct orientation (tab side must point toward the latch side of panel). Insert actuator into top hole of VeriLock
assembly from back side as shown.
Rotate VeriLock assembly to the correct orientation. (tab side must point toward the latch side of panel).
Tab side as
viewed from
back.
Tab side as
viewed from
back.
Top Hole
Top Hole
VeriLock Assembly
VeriLock Assembly
Lock Actuator
Accionador del
cerrojo
Actuator
Accionador
Actuator
(in top
hole only)
Actuator
(in top
hole only)
Alignment Tabs
(will fit in only
one orientation)
Alignment Tabs
(will fit in only
one orientation)
(Verify arrows
align on the tab
side as shown)
(Verify arrows are
aligned as shown
on the tab side)
VeriLock® Assembly
(tab must point toward
latch side of panel)
VeriLock® Assmbly
(tab must point toward
latch side of panel)
VeriLock assembly can be rotated for use on either
left handed (LH) or right handed (RH) panels.
VeriLock assembly can be rotated for use on either
left handed (LH) or right handed (RH) panels.
Latch
Latch
Tab
Tab
VeriLock® Assembly
(back view)
VeriLock® Assmbly
(back view)
VeriLock Sensor
(anti-tamper switch)
VeriLock Sensor
(anti-tamper switch)
Sensor contains an anti-tamper switch.
Do not apply sensor over wet nish or
rough/dirty surface. Improper switch
function may result.
Sensor contains an anti-tamper switch.
Do not apply sensor over wet nish or
rough/dirty surface. Improper switch
function may result.
Indicator Light
Indicator Light