Product Manual
Page 4 of 16 • Andersen Weight Distribution Hitch Installation Manual 7-2019 • www.AndersenHitches.com
TOOLS NEEDED FOR INSTALLATION
Measuring Tape
5/16″ Allen Wrench
Two 1-1/8″ Box End or Adjustable Wrenches
Two 15/16″ Box End or Adjustable Wrenches
Torque Wrench capable of 150 ft-lbs of torque
1-1/4″ Socket (provided, ts 1/2″ drive)
1. Adjustable Rack (4″ drop/rise rack with 2″ shank shown)
2. Pin and Clip for adjustable rack and ball housing (2 Sets) #3430
3. Ball Housing Adjustment Bolts and Nuts (3/4″ x 2-1/2″, 2 sets) #3378
4. Ball Housing Plate Screws (6 pcs, attached to ball housing)
5. Ball Housing Plate (attached to ball housing)
6. Ball Housing (includes housing, tapered ball, and brake material cone) #3383, #3355
7. Spring Clip (attached to tapered ball) #3376
8. Frame Bracket Bolts and Nuts (5/8″ x 4″, 4 sets)
9. ‘Pointed’ Set Screws (2 or 4 pcs, depending on your specic WD kit)
10. Outside Frame Brackets (2 pcs, universal 3″/4″/5″/6″ brackets shown)
11. Inside Frame Brackets (2 pcs, universal 3″/4″/5″/6″ brackets shown)
12. Tension (Triangle) Plate #3356
13. Chain Shackles (2 pcs) #3374
14. Tension Chains with End Bolts (2 pcs) #3357
15. High-Density Urethane Springs (2 pcs) #3358
16. Spring Washers (2 pcs) #3388
17. Tension Nuts (1-1/4″, 2 pcs) #3370
18. 1-1/4″ Socket #3384
PARTS ILLUSTRATION – WEIGHT DISTRIBUTION HITCH
Possible Add-Ons (see page 14 for more info and products)
8″ drop/rise
adjustable rack
2″ or 2-5/16″ WD Ball
with Spring Clip
7″/8″ Brackets4-3/8″ Brackets
Raised 3″/4″/5″/6″
Brackets
1
8
8
10
10
11
9
12
13
14
15
16
17
3
2
7
2
18
9
15
16
17
6
5
4