User Manual

15
000XXXX
12
Interior
Position center of electric operator at marked line on sill with operator tabs in locating kerf.
Position center of electric operator at marked line on sill with operator tabs in locating kerf.
Kerf
Kerf
13
Interior
Fasten electric operator with four (4) screws.
Fasten electric operator with four (4) screws.
Do not over drive screws. Product
damage may result.
No ajuste demasiado los tornillos.
El producto se puede dañar.
14
Interior
Strip pigtail wire ends and align same color wires with 18-3 wires and connect with wire nuts. Make sure wire color continuity is maintained.
Strip pigtail wire ends and align same color wires with 18-3 wires and connect with wire nuts. Make sure wire color continuity is maintained.
Pencil Mark
Pencil Mark
Center of Electric Operator
Center of Electric Operator