Instructions / Assembly

8
INSTALL
CLOSERS
(Left Hand)
7
1. Pin the closer in place using the short pin
in the jamb bracket and the long pin in the
door bracket.
2. Press the push button on the push button
closer and then pull (extend) closer by
1/4” - 3/8”.
1. Attach the arm from the installation kit to
the base by inserting the tabs on the arm
into the slots in the base. Fasten with a 2”
screw from the installation kit.
a
b
c
OPPOSITE VIEW
OTRO PUNTO DE VISTA
VUE DE FACE
E
E
i
VIEW
i
VIEW
1. Close the storm door. Swing the closer assembly
over until the door bracket is resting against the
door frame and is level.
2. Attach the closer door bracket to the door frame
through the two pre-drilled holes using two 5/8”
screws from the installation kit.
d
E
i
VIEW
1.
Position base from installation kit onto door
jamb by touching front of base to back of
hinge rail (or as close as possible), and align
bottom of base with top of sweep (E). Mark
the hole locations on door jamb.
2. Drill holes in door jamb at the marked
locations.
3. Attach the base to door jamb with two 2”
screws from installation kit into the two
holes closest to the interior of the house.
Repeat steps a-d to install the closer 5/8” above the
window opening:
1. After the installation is complete, replace the
bump closer with the standard closer at the top.
2. Re-install the bump closer at the bottom.
1/4” - 3/8”
i
VIEW
5/8”
e
1/8”
!
!
1/2”
1/2”
1/2”
1”
1 1/2”
2”
1 1/2”
5/8”
5/8”
Tools needed:
!
!
1/2”
1/2”
1/2”
1”
1 1/2”
2”
1 1/2”
5/8”
5/8”
x 4
5/8”
#8
#10
#12
#6
3/4” Machine Pan Painted
1/2” SMS Pan
1/2” SMS Pan Painted
1/2” SMS Flathead
1/2” Self-Drill Pan
1/2” Self-Drill Pan Painted
3/4” Machine Flathead
7/8” Machine Pan Painted
1” SMS Pan
1” SMS Pan Painted
1” Machine Pan Painted
1-1/2” Machine Flathead
1-1/2” Machine Flathead
2” SMS Pan Painted
5/8” SMS Pan Painted
1-1/4” SMS Pan
x 2
#8
#10
#12
#6
3/4” Machine Pan Painted
1/2” SMS Pan
1/2” SMS Pan Painted
1/2” SMS Flathead
1/2” Self-Drill Pan
1/2” Self-Drill Pan Painted
3/4” Machine Flathead
7/8” Machine Pan Painted
1” SMS Pan
1” SMS Pan Painted
1” Machine Pan Painted
1-1/2” Machine Flathead
1-1/2” Machine Flathead
2” SMS Pan Painted
5/8” SMS Pan Painted
1-1/4” SMS Pan
x 2
#8
#10
#12
#6
3/4” Machine Pan Painted
1/2” SMS Pan
1/2” SMS Pan Painted
1/2” SMS Flathead
1/2” Self-Drill Pan
1/2” Self-Drill Pan Painted
3/4” Machine Flathead
7/8” Machine Pan Painted
1” SMS Pan
1” SMS Pan Painted
1” Machine Pan Painted
1-1/2” Machine Flathead
1-1/2” Machine Flathead
2” SMS Pan Painted
5/8” SMS Pan Painted
1-1/4” SMS Pan
M
x 6
2”
#8
#10
#12
#6
3/4” Machine Pan Painted
1/2” SMS Pan
1/2” SMS Pan Painted
1/2” SMS Flathead
1/2” Self-Drill Pan
1/2” Self-Drill Pan Painted
3/4” Machine Flathead
7/8” Machine Pan Painted
1” SMS Pan
1” SMS Pan Painted
1” Machine Pan Painted
1-1/2” Machine Flathead
1-1/2” Machine Flathead
2” SMS Pan Painted
5/8” SMS Pan Painted
1-1/4” SMS Pan
i
VIEW
B
B