Instructions / Assembly

1. Open the door.

2. Push and hold the safety release slide up,

then rotate the handle up a 1/4 turn. The

handle should now be in a vertical position.

1. Orient the glass panel (I) so the notches

face the exterior, on the handle side.

2. Slide the glass panel into the door frame on

the hinge side rst. The frame of the glass

panel should be seated into the snugger

bar.

3. Then position the handle side of the glass

panel until it is ush with the door frame.

1. While holding the glass panel in place,

rotate the handle down a 1/4 turn to lock

the glass panel in door frame.

TIP: Ensure glass panel is fully seated in door

frame for easy operation.

INSTALL THE

GLASS PANEL

INTO DOOR

FRAME

(Left Hand)

VIEW

The notches located on backside of handle side of glass

panel and insect screen may contain sharp edges. Use

caution when handling glass panel and insect screen.

Failure to do so may result in injury.

WARNING

The glass panel/insect screen is secured in door frame

by door handle locking mechanism. Once door handle

has been rotated up to vertical position, the glass panel

/insect screen are no longer secured in door frame.

Immediately remove glass panel/insect screen from

door frame after releasing locking mechanism. Failure to

do so could result in injury and/or product damage.

WARNING

SNUGGER BAR

BARRA DE SOPORTE

BARRE DE CALAGE