Instructions / Assembly

11. Secure Frame in Rough Opening
• Fasten frame in rough opening through holes in Head
and Side Jambs using #10 x 2-1/2" Colored Screws.
Tighten until snug.
DO NOT nail into Head Installation Flange or Side
Installation Flanges to secure frame. Frame must
be secured through holes provided.
Temporary
Shims
#10 x 2-1/2"
Screw
Remove temporary shims from Head Jamb after
unit is secured. Failure to remove shims may affect
product performance and/or unit operation.
Exterior View
• Remove temporary shims from Head Jamb.
PLUM - LEVEL - SHIM
PLUM - LEVEL - SH
Shim
• Insert shims between Side Jambs and framing at
each fastener location. Shims will be held in place by
fastener screws.
• Shims at Head Jamb are temporary. DO NOT place
shims on top of predrilled holes at Head Jamb.
• Check Head and Side Jambs for level making
adjustments using shims if necessary. Jambs must be
plumb, level, and square.
Allow 1/4" space around perimeter of unit between
exterior finish and door frame for Sealant. Failure
to do so may result in product and/or property
damage.
Clamp
Side Jamb
Level
Head Jamb
10. Shim and Plumb Jambs
Side Jamb
Interior View
Exterior View
Screwdriver
Clamp
Frame Assembly and Installation Guide
10