Installation Guide

Andersen

Patio Doors

Insect Screen Installation

ADJUSTING

SCREW

4. Check Screen Panel Operation

• Install

Interior and Exterior Pulls,

through pre-drilled holes

corresponding with the adjacent door lock. Secure

Interior and

Exterior Pulls

with the two No. 6 x 1" flat head screws provided.

Do not overtighten.

ndersen

Fig. 2

3. Remove Screen Panel

Interior

Pull

Exterior

Pull

• Check

Screen Panel

operation. Insure that rollers are properly

seated on track and

Screen Panel

is level. If bottom appears to

be unlevel or dragging, insert a screwdriver into adjusting holes

on screen and turn screw to raise or lower

Screen Panel

• Remove

Screen Panel

from door frame. Attach

Identification

Plate

to the exterior of the screen (on the side opposite the

pulls.) Using two No. 6 x 5/8" screws provided. Do not

overtighten. Replace screen panel into door frame.

2. Install Pulls