Wrist Digital Blood Pressure Monitor - Instruction Manual Original Manuel d’instructions Traduction Manual de Instrucciones Traducción Manuale di Istruzioni Traduzione 使用手冊 1WMPD4003120E 翻譯
Contents Dear Customers................................................................................................................................................... 2 Preliminary Remarks ........................................................................................................................................... 2 Precautions ..........................................................................................................................................................
Dear Customers Congratulations on purchasing a state-of-the-art A&D blood pressure monitor, one of the most advanced monitors available today. Designed for ease of use and accuracy, this device will facilitate your daily blood pressure regimen. We recommend that you read through this manual carefully before using the device for the first time. Preliminary Remarks This device conforms to the European Directive 93/42 EEC for Medical Products. This is made evident by the mark of conformity.
Wireless communication device, such as home networking devices, mobile phones, cordless phones and their base stations, walkie-talkies can affect this blood pressure monitor. Therefore, a minimum distance of 30 cm should be kept from such devices. Measuring blood pressure too frequently may cause harm due to blood flow interference. Check that the operation of the device does not result in prolonged impairment of blood circulation, when using the device repeatedly.
Parts Identification Display button ( average, memory and change of preset parameters) START button Battery cover Cuff MEMORY Average Alkaline batteries (LR03 or AAA) Display Systolic pressure Diastolic pressure WHO classification indicator and Pressure bar indicator IHB/AFib symbol Heart mark Pulse rate Battery indicator English 4
Symbols Symbols that are printed on the device case Symbols Function / Meaning Standby and Turn the device on SYS Systolic blood pressure in mmHg DIA Diastolic blood pressure in mmHg PUL Pulse per minute Battery installation guide Direct current SN Serial number Date of manufacture Type BF: Device and cuff are designed to provide special protection against electrical shocks.
Symbols that appear on the display Symbols Function / Meaning / Recommended Action Appears while measurement is in progress. It blinks when the pulse is detected. Remain as still as possible. IHB/AFib symbol appears when an irregular heartbeat is detected. It may light when a very slight vibration like shivering or shaking is detected.
Using the Monitor 1. Installing / Changing the Batteries 1. Remove the battery cover. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+ and -) are correct. Use only LR03 or AAA batteries. Battery cover 3. Attach the battery cover. Used batteries Insert the batteries as shown in the battery compartment. New batteries If installed incorrectly, the device will not work.
2. Applying the Cuff 1. Wrap the cuff around your wrist about 1 cm above your hand as shown in the figure at the right. About 1 cm 2. Apply the cuff tightly using the Velcro strip. Note: For accurate measurements, apply the cuff tightly and measure on a bare wrist. 3. How to Take Accurate Measurements For the most accurate blood pressure measurement: Remain still and keep quiet during measurement. Sit down in a comfortable position.
4. Measurement During measurement, it is normal for the cuff to feel very tight. 5. After Measurement While readings are displayed, if you press the START button to turn the device off, new readings are stored in memory. While readings are displayed, if you press the button to turn the device off, new readings are not stored. Remove the cuff and record your data.
Measurements Note: The UB-525, once used, will provide an inflation appropriate to the user. 1. Wrap the cuff around your wrist. Sit comfortably with the cuff at the same level as your heart and relax. 2. Press the START button. All of the display segments are displayed. 3. Zero (0) is displayed blinking briefly. Then the display changes, as measurement begins. The cuff starts to inflate. It is normal for the cuff to feel very tight.
Recalling the Memory Data Note: This device stores the last 60 measurements in memory. Memory mode button when turning the device off. 1. Press the The average of all measurements and the number of data are displayed. or START button to turn the If no data, “0” is displayed. Press the Average of all the data device off. Number of all data 2. Use the following buttons to display data (of number and measurement data). The device displays the average of all measurements and the number of data are displayed.
What Is The IHB/AFib Indicator? When the monitor detects an irregular rhythm during the measurements, the IHB/AFib indicator will appear on the display with the measurement values. Note: We recommend contacting your physician if you see this IHB/AFib indicator frequently. What Is The AFib? The heart contracts due to electrical signals occurring in heart and sends blood through the body.
WHO Classification Indicator Each six segments of the bar indicator correspond to the WHO blood pressure classification is described on page 14. Example Moderate hypertension Mild hypertension High normal WHO Classification Indicator Severe hypertension Moderate hypertension Mild hypertension High normal Normal Optimal : The indicator displays a segment, based on the current data, corresponding to the WHO classification.
Why Measure Blood Pressure at Home? Blood pressure measured at a clinic or doctor's office may cause apprehension and can produce an elevated reading, 25 to 30 mmHg higher than that measured at home. Home measurement reduces the effects of outside influences on blood pressure readings, supplements the doctor's readings and provides a more accurate, complete blood pressure history.
Troubleshooting Problem Possible Reason Nothing appears in the Batteries are drained. display, even when Battery terminals are not in the correct the device is turned position. on. Battery voltage is too low. (LOW BATTERY mark) blinks. The cuff does not If the batteries are drained completely, inflate. the mark does not appear. The cuff is not applied properly. You moved your wrist or body during the measurement. The device does not measure. Readings are too high The cuff position is not correct.
Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, contact the authorized dealer in your area or our customer service department. The A&D customer service will provide technical information, spare parts and units to authorized dealers. The device was designed and manufactured for a long service life.
Clinical test EMC Memory Operating conditions Transport / storage conditions Dimensions Weight Ingress protection According to ISO81060-2：2013 IEC 60601-1-2: 2014 Last 60 measurements +10 to +40 °C / 15 to 85 %RH / 800 to 1060 hPa -20 to +60 °C / 10 to 95 %RH / 700 to 1060 hPa Approx. 56 [W] x 88 [H] x 21.5 [D] mm Approx. 90 g, excluding the batteries IP20 Note: Specifications are subject to change for improvement without prior notice.
MEMO English 18
A&D Company, Limited 1-243 Asahi , Kitamoto-shi, Saitama 364-8585, JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 Emergo Europe B.V. Prinsessegracht 20, 2514 AP The Hague, The Netherlands Telephone: [31] (70) 345-8570 Fax: [31] (70) 346-7299 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131, U.S.A.
