Instruction Manual

3
1.1. Part Names
(Not to be used)
Option board
1.2. Installing the Ionizer
Caution Disconnect the AC adapter before installing the ionizer to the
balance.
1. Remove the two screws, and then gently pull the option panel
with the cable connector from the balance.
Balance rear side
2. Peel off the connector that is secured to the panel with double-sided
tape and insert it into the socket of the option board.
3. Attach the option board to the balance.
Secure the board with the two screws removed in step 1.
Balance rear side
4. Using the connection cable (60 cm), connect between the
option board and the ionizer.
Balance rear side
Connector for the option board
Stand
LED
IR (touchless) switch
External input
connector
Connector for the
ionizer
Ionizer (front side)
Ionizer (rear side)
Connector for the
external IR switch
Electrodes
Electrodes
Connection cable (60 cm)
Double-sided tape
(To secure the ionizer)
Ionizer (rear side)