Instruction Manual

Table Of Contents

Relations between items in sensitivity adjustment mode and key operations are shown in the diagram below.

Note: Use the MODE key to select the item to execute, and then execute with the TARE key.

Note: To end sensitivity adjustment mode, press the ZERO key or CAL switch. The display

turns off. (You can also turn it off using the ON/OFF switches.)

In sensitivity adjustment

mode (transition method)

Weighing mode

Method 1

Press and hold

Method 2

Press

Setting of the weighing capacity,

minimum division, and decimal point

Display OFF

Setting of the CF function

Sensitivity adjustment using a weight

Press or

Press