Operating instructions
Table Of Contents
- Table of Contents
- Getting started
- Locating the controls
- Playing a CD
- 1. Connect your CD player.
- 2. Insert a CD.
- 3. Play a CD.
- Playback options
- Playing tracks repeatedly (Repeat play)
- Playing a single track (Single play)
- Playing tracks in random order (Shuffle play)
- Playing your favorite tracks by adding Bookmarks (Bookmarked track play)
- Playing tracks in your favorite order (PGM play)
- Available features
- G-PROTECTION function
- Displaying CD text information
- Checking the remaining time on the CD and the number of tracks left
- Emphasizing the bass sound (SOUND)
- Protecting your hearing (AVLS)
- Locking the controls (HOLD)
- Turning off the operation beep sound
- Turning off the LCD’s backlight
- Connecting your CD player
- Connecting a stereo system
- Connecting to a power source
- Using the rechargeable battery
- Using the dry battery
- Notes on the power source
- Additional Information
- Precautions
- Maintenance
- Troubleshooting
- Specifications
- Accessories (supplied/optional)
19
You can use the following power sources:
• Rechargeable battery
•AC power adaptor (see “Playing a CD”)
• LR6 (size AA) alkaline battery (external
battery case)
For the battery life and charging time of the
rechargeable battery, see “Specifications.”
Using the rechargeable
battery
Charge the rechargeable battery before using
it for the first time. You can use only the
following rechargeable battery for your CD
player.
• NH-14WM (A)
1
Open the battery compartment lid
inside your CD player.
2
Insert a rechargeable battery by
matching the 3 to the diagram in
the battery compartment and
close the lid until it clicks into
place.
3
Connect the AC power adaptor to
the DC IN 3 V jack of the supplied
charging stand and an AC outlet.
Then place the CD player on the
supplied charging stand, aligning
the V mark on the CD player with
the v mark on the stand.
If the AC power adaptor does not fit the
AC outlet, use the AC plug adaptor.
B
Connecting to a power source
to an AC outlet
to DC IN 3 V
Connecting to a power source
(Continued)
AC power adaptor
Align V with v.
CHARGE lamp
Insert the # end first.