User's Manual

POWER SOURCE

The JBS-215 operates using standard 120V~ 60Hz AC household power.

AC POWER OPERATION

An AC-DC Adaptor with the output of DC 5V, 3A (included) is required for operating the main

unit when using AC power mode. To connect the AC-DC Adaptor to the unit and 120V~ 60Hz

AC Outlet:

1. Firmly and securely insert the DC plug of the

adaptor into the DC Jack on the back of the unit.

2. Plug the AC Adaptor plug into the 120V AC outlet.

Connecting this system to any other power source

may cause damage to the system

CLOCK SETTING

The LCD DISPLAY 12:00 will blink when the unit is plugged in for the first time and goes into

standby mode.

Setting the Time

1. In standby mode, Press and hold the CLK SET BUTTON unit the hour digits will blink.

2. Repeatedly tap the BUTTON or BUTTON to set the hour. Press and hold the

buttons for fast advance/reverse setting.

Note: The PM icon on the left of the LCD DISPLAY will light when the hour is set to PM and

will be off when the hour is set to AM.

3. Press the CLK SET BUTTON to confirm and the minute digits will blink.

4. Repeatedly tap the

BUTTON or BUTTON to set the minute. Press and hold the

buttons for fast advance/reverse setting.

5. Tap the CLK SET BUTTON to confirm and complete the setting. The display will stop

blinking.

ALARM OPERATION

The JMS-215 features a dual alarm clock.

Setting the alarms:

1. In standby mode, press and hold the ALARM 1 BUTTON, the AL1 icon will light and the

hour of the alarm time will blink.

2. Tap the

BUTTON or BUTTON to set the hour. Press and hold the buttons for fast

advance/reverse setting.

3. Tap the ALARM 1 BUTTON to confirm the hour setting, the minutes digits will blink to

prompt for input.

4. Tap the BUTTON or BUTTON to set the minute. Press and hold the button for fast

reverse/advance setting.

5. Press the ALARM 1 BUTTON to confirm the minute setting, the alarm sound icons will show

on the LCD DISPLAY. (bU – Alarm sound, FM – FM radio, CD – CD MUSIC)

6. Tap the

BUTTON or BUTTON to select the wake up option (ALARM, FM Radio or

CD MUSIC).

7. Press the ALARM 1 BUTTON to confirm the wake up setting, the alarm sound level digits

will blink to prompt for input.

8. Press the ALARM 1 BUTTON to confirm and complete the alarm setting.

9. The ALARM 2 setting procedures are same as ALARM 1.