User Manual

— 15 —
STEP 10
Installing the Hood
Method 1: Attaching the unit to the wall
r The following drawings show the mounting dimensions
of the 30 in (750 mm).
r Mark or drill 4 small holes on the mounting position
according to the dimensions on Figure #14.
r Insert 4 drywall anchors into the holes, and 2 screws
into the top holes
r Hang the range hood onto the screws.
r Open the filter and install the inner panel in place with
safety screws.
r Attach the ducting to the damper and exhaust
outdoors. (Figure #15)
Installation
Method 2: Attaching the unit to under kitchen cabinets
r Mark or drill 4 small holes on the mounting position
according to the space and dimensions cited on the
following image (Figure #16).
r Install 4 screws.
r Open the filter, align the hole of hood to the screws, then
tighten the screws.
r The following drawings show the mounting dimensions of
the 30 in (750 mm).
Figure #14
Figure #15
Figure #16
Figure #17
Duct from top Duct from back
Duct from top Duct from back