Use and Care Guide

ManualsBrandsAncona ManualsBathroomPolished Stainless Steel Hardwired Towel Warmer

Prestige Dual Towel Warmer

User Manual

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

Carefully read the important information

regarding installation, safety and maintenance.

Keep these instructions for future reference.

MAAN5320-04

2019-08-23

Summary of content (8 pages)

PAGE 1
Prestige Dual Towel Warmer User Manual & Installation Instructions IMPORTANT SAFETY INSTRUCTIONS Carefully read the important information regarding installation, safety and maintenance. Keep these instructions for future reference.
PAGE 2
Required Tools STARHEAD SCREWDRIVERS FLAT HEAD SCREWDRIVERS DRILL & BIT MEASURING TAPE 5/16” Diameter LEVEL PENCIL Electrical requirements: 120V, 120W, 60Hz, 0.92A. MUST HAVE A GROUND CONNECTION. Should be protected by a 15 amp GFI circuit breaker or equal. READ ALL INSTRUCTIONS IN THE MANUAL BEFORE INSTALLING THIS TOWEL WARMER. Before You Begin Unpack the towel warmer carefully to avoid any damage or loss of any part.
PAGE 3
Product Dimensions 76.2 cm (30 in. ) 11.2 cm (4.4 in.) 57.8 cm (22.75 in.) 61 cm (24 in.) 14.1 cm (5.5 in.) 6.1 cm (2.4 in.) Ø 1.9 cm (0.75 in.) Ø 3.2 cm (1.25 in.) 10.1 cm (3.97 in.) 48 cm (18.9 in.) Parts for Plug-In Wall Mount Installation x4+1 x4+1 x4 x4+1 M8x15 x4+1 ST4.
PAGE 4
Plug-In Installation w x Parts for Hardwire Wall Mount Installation x4+1 x4+1 x1 x4 x4+1 M8x15 x4+1 ST4.
PAGE 5
Hardwire Installation w x y U —5— All electrical connections in the junction box must be performed by a fully qualified electrician.
PAGE 6
Operation and Maintenance Instructions • • • • After installation, connect the electric power and turn on the switch. The indicator light will show red and the towel warmer will start to work. Turn off the switch when the towel warmer is not in use. The indicator light will turn dark and the towel warmer will stop working. When cold, clean the towel warmer with a soft dry towel. Do not clean with abrasive cleaning powder. Unplug the unit if not in use for a long period of time.
PAGE 7
In-Wall Auto Shut-Off Electronic Timer Service@AnconaHome.com 1-888-686-0778 Rating: 120V/15A/1800W Resistive (Appliance) 120V/8.
PAGE 8
Instructions NOTE: Neutral wire is required for this timer to function. This timer is not compatible for 3-wire switches. 1. 2. 3. 4. 5. 6. 7. Turn power OFF at the circuit breaker or remove the fuse. Remove existing wall plate and switch, if applicable. Take note of supply (“hot” (usually black or red)) and neutral wires for future reference. Ensure neutral (white) wire is present in the junction box.