Instructions / Assembly

Installation
Steps 1 to 3
Steps 4 to 7
Steps 8 to 11
Installation Size Map
A. Move handle into "OFF" position.
B. Turn on water supplies. Check connections for leaks.
C. Remove and let both hot and cold water run for
one minute. This will help clean any debris that might
otherwise clog the system. Replace aerator.
D. Operate handle up and down, in cold and hot positions,
to flush water lines thoroughly.
aerator
Test Faucet Installation
Simply rinse the surface with clear water or
mild liquid detergents
if necessary Dry the
faucet with a clean soft cotton cloth
Do not
use any cleaning agents containing
acids
polish abrasives or harsh cleaners
Maintenance:
2.6” (6.8 cm)
2.8”
(7.1cm)
Max 1.77”
(4.5 cm)
0.5” NPT
3.9” (10 cm) 3.9” (10 cm)
Ø 2” (5.2 cm)
Ø 2” (5.2 cm)
6.7”
(17 cm)
6.1” (15.5 cm)
4.5”
(11.5 cm)
Ø 1.3” (3.3 cm)
×3 Ø1.3”
(3.5 cm)
cut-out
ColdHot