Installation Guide

Checking and Testing
Maintenance:
3
4
5
Position the flexible hose and fix it
to the faucet as shown with clamp
spring.
Connect the water supply lines to
faucet and water supply valve and
tighten with wrench.
Warning: The water supply
valves mentioned above are not
included, please purchase them
at your local hardware store.
6
Remove the aerator by aerator
wrench. Turn the faucet handle all
the way on, turn on hot and cold
water supply and flush water lines
for one minute. Reinstall aerator by
aerator wrench.
Check all connections at arrows for
leaks, retighten if necessary.
BUT DON’T OVERTIGHTEN
Simply rinse the surface with clear water or
mild liquid detergents (if necessary). Dry the
faucet with a clean soft cotton cloth. Do not
use any cleaning agents containing acids
polish abrasives or harsh cleaners.
WARNING:
DON'T OVERTIGHTEN!
HOT
COLD
1/2” (13 mm) IPS