Warranty

Checking and Testing
Maintenance:
4
5
Apply teflon tap to the shower arm , put
flange and connect it to water supply
pipe. After fixing the shower arm, screw
the shower head to the shower arm.
ATTENTION: don't forget the o-ring
between the shower arm② and the
shower head③. Position trim plate ④,
fix it with screws ⑤, then tighten with
screwdriver. Put the knob⑥ , and fix the
handle⑦ with screw⑧, finally put the
index ⑨. Then assemble the outlet spout
, loosen the screw and connect the
spout to the water supply pipe, then
tighten the screw again with allen key.
Simply rinse the surface with clear water or
mild liquid detergents (if necessary). Dry the
faucet with a clean soft cotton cloth. Do not
use any cleaning agents containing acids
polish abrasives or harsh cleaners.
Maintenance
Check all connections at arrows for
leaks, retighten if necessary.
BUT DON’T OVERTIGHTEN
1
2
3
Remove the handle screw with
allen key③, take out the handle①,
then remove the trim cap④.
If faucet leaks from the handle or drips from spout, please replace cartridge following the steps:
Unscrew the cartridge nut①with
adjustable wrench, then take out
the old cartridge②.
Place a new cartridge in the
cartridge seat, then screw the
cartridge nut and assemble the
handle by securing the screws.
O-ri ng
3
2
1
4
5
7
8
9
6
10
4
3
1
2
1
2
10