Installation & Assembly

A. Move handle into "OFF" position.
B. Turn on water supplies. Check connections for leaks.
C. Remove hand shower and let both hot and cold water
run for one minute. This will help clean any debris that
might otherwise clog the system. Replace hand shower.
D. Operate handle up and down, in cold and hot positions,
to flush water lines thoroughly.
Three Hole InstallationInstallation size map
Test Faucet Installation
Simply rinse the surface with clear water or
mild liquid detergents
if necessary Dry the
faucet withaclean soft cotton cloth
Do not
use any cleaning agents containing
acids
polish abrasives or harsh cleaners
Maintenance:
Step 1: Repeat steps 1 and 2 from Single
Hole Installation.
Step 2: Insert plate before inserting faucet
body into sink deck.
Step 3: Repeat steps 3 to 6 from
Single Hole Installation.
Step 4: Ensure all connections are
tightly set in place to avoid
leakage.
19 1/4” (490 mm)
18 11/16” (221 mm)
Max 1 3/4”
(45 mm)
9 7/8” (252 mm)
2 1/16” (52 mm)