Installation & Assembly

INSTALLATION INSTRUCTIONS
General Recommendations:
Read installation and maintenance instructions, thoroughly before installation.
Be sure to use proper tools and always wear personal safety accessories for your protection.
Warning: The enclosed cut-out template is provided as a guide only and should be checked
against actual sink to determine correct fit. Metal edges may be sharp. Use gloves when handling.
Long-Life Care
Ancona Stainless Steel Sinks are easy to keep looking new, longer with minimal care. For best results,
always rinse with a mild soap and wipe after each use. Rub lightly with soft cloth in the direction of the
grain line on a regular basis. To avoid damage and discoloration to the sink surface never use a steel wool
or scouring pad.
Tools and Materials needed:
- Tape Measure
- Pencil (NOT ink)
- Putty knife
- Scissors
- Adjustable wrenches
- Sealant drill and 1/2” (or larger) drill bits
- Silicone Adhesive Sealant Rags
- Denatured Alcohol
- Ear Protection
- Eye Protection
- Gloves
- Hacksaw/Jigsaw
- Mounting Clips (included)
- Cut-out template (included)