Installation Guide

CARE AND MAINTENANCE
ALWAYS:
- Clean everyday by thoroughly rinsing with a
mild soap and warm water and wipe dry.
- Rub lightly with a soft cloth in the direction of
grain lines on a regular basis for additional
preventive cleaning.
- Keep the sink free of any standing water as
this can cause a buildup of mineral deposit,
which can affect the appearance of your sink.
- Any stubborn stains should be removed by
scrubbing in the direction of the grain with a
mild abrasive such as Comet.
- Always rinse the sink after using any cleaning
agent and wipe dry. Clean any mineral deposits
built up over time with a mild solution of vinegar
and water followed by a thorough flushing with
water.
- Remove any scratches with a Scotch-brite pad
and cleaning agent rubbing in the direction of
the grain.
NOT RECOMMENDED FOR MIRROR FINISH.
NEVER:
- Leave water spots, steel cookware or utensils
in the sink for lengthy periods; iron particles
often develop rust spots in the stainless steel
surface.
- Use a steel wool or scoring pad as it damages
the sink surface and causes discoloration.
- Let household cleaning agents or bleach sit in
your sink for long period of time as this may ruin
the finish of your sink.
- Leave rubber mats, sponges, or cleaning
pads in the sink for long period of time as this
may ruin the finish of your sink.
- Use any drain cleaning products containing
sulfuric acid or hydrochloric acid as this will
attach the sink. Silver cleaners can also contain
acids that will damage the sink surface.
- Use the inside of the sink as cutting surface.