Installation Guide

UNDERMOUNT INSTALLATION
6. Loosely attach mounting brackets to the countertop, parallel to the cut-out opening using the supplied
mounting screws and nuts. Mounting screws with brass inserts are supplied with the sink, however,
countertop material vary and the correct type of fasteners should be recommended by your installer or
supplier.
7. Clean sink flange and underside of cut-out area of countertop,
making sure that the area is smooth and free of grease. Apply
continuous bead of silicone caulk evenly on top of sink flange.
(FIGURE 4)
8. Position and align sink over the countertop opening and press sink
onto countertop. Turn bent end of mounting bracket to snug over the
sink rim.
9. Check alignment of sink again and tighten fasteners to secure
sink. (FIGURE 5)
10. Wipe away excess silicone caulk with damp cloth, Connect drain and water supply according to
manufacturer's instruction.