Instructions / Assembly

CSA-Approved Flexible ½” or ¾” Gas Line
TOOLS YOU WILL NEED:
Pencil Phillips-Head Screwdriver
Ruler Safety Glasses
Saber Saw Pipe Wrench 1/8″ Drill Bit & Electric or Hand Drill
Cutting the Countertop
1) Use a 24” or deeper base cabinet.
2) Cut the opening in the countertop. To
ensure accuracy it is best to make a
template (see Figure 9) for the opening.
Make sure the sides are parallel also
rear and front cuts are exactly
perpendicular to the sides. Observe all
minimum clearances.
Figure 8
20