Installation Guide
— 16 —
Operation
Power Settings
u
Press the button + once and the motor starts to
operate at Low speed.
v
Press the button + again and the motor will reach
Medium speed.
w
Press the button + once more and the motor will
reach High speed.
x
Press the button - to lower speeds in succession until
the motor stops working (power off).
Timer Function
u
The control module provides the option to run the
motor for a predetermined time period in order to
evacuate remaining vapors from the kitchen.
v
Press the timer button while the motor is
running. The motor will shut off automatically after 10
minutes.
Lights
Increase
Speed
Decrease
Speed
Timer
Light
IMPORTANT: Drain oil from bafes, spacers, lters, oil tunnels, oil containers before oil and residue overow!
• Remove all bafes, spacers, lters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel bafes, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should lters wear out due to age and prolonged use, replace with a new lter.
Maintenance
Cleaning Filters
u
Press the light button to turn LED lights on and
off.