Use and Care Manual

Installations (refer to Page 4 for parts):
NOTE: Use threaded drywall anchors only when
mounting the hood on sheet rock. Mounting
the hood on wall studs or lumbars is highly
recommended.
Step 1: Measuring
• Measure the distance between stove top and the bottom of range hood. A distance of 24” to 30” is
recommended with a minimum of 30” for gas stove tops.
Step 2: Preparing the cabinet
•
Measure and cut an opening at the bottom of the cabinet to fit the motor box of the range hood. (See Fig #1)
•
Measure and cut a hole in the top of cabinet to fit the duct tube. (See Fig #1)
Note that the hole in the top of the cabinet may not be necessary depending on venting method chosen.
(See Page 7)
Step 3: Attaching damper flap
•
Fix the damper flap into the damper hole on top of the range hood motor box. (See Fig #2)
INSTALLATION:
Hardware Note: For safety reasons, range hood mounting screws and anchors will not be
included due to the variation of cabinetry constructions and wall material. Please consult your
installation specialist regarding the optimal type of mounting screws and wall anchors to suit
your home’s construction.
•