Instructions / Assembly

Installations ( refer to Page 4 for parts):

NOTE: Use threaded drywall anchors only when mounting

the hood on sheet rock. Mounting the hood on wall

studs or lumbars is highly recommended.

Step 1: Measuring

• Measure the distance between stoove top and the bottom of range hood. A distance of 24” to 30” is

recommended with a minimum of 30” for gas stove tops

Step 3: Attaching Vent/Damper

• Attach the vent/damper to the top of the motor using supplied screws. (See Fig #2)

Step 2: Preparing the cabinet

• Measure and cut opening at bottom of the cabinet to fit the motor box of the range hood. ( See Fig #1)

• Measure and cut a hole in the top of cabinet to fit the duct tube. (See Fig #1)

• Note that the top hole may not be necessary depending on venting methods chosen. (See Page #7)

For consumer safety reasons, mounting screws and anchors have not been supplied with this range

hood. Different wall and cabinetry construction methods require specific types of screws and wall

anchors. Please consult your installation specialist regarding the best type of mounting screws

and wall anchors to suit your home’s construction.

Fig #1 Fig #2