Installation Guide

Page
7
Ŗ This range hood is factory set for venting through the roof or wall.
Ŗ Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.
IMPORTANT:
Ŗ NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or
garages. All exhaust must be ducted to the outside.
Ŗ Use metal/aluminum duct work only.
Ŗ Fasten all connections with sheet metal screws and tape all joints with certiſed Silver Tape or Duct Tape.
Ŗ Use caulking to seal exterior wall or roof opening around the cap.
Option 1:
Horizontal wall
venting
Option 2:
Side wall cap
Vertical roof venting
Roof cap
Venting Methods :