Installation Guide

5. Store excess wires in the wiring box.
6. Drop oil tunnel into recess support near rear of hood. Refer to Figure 8.
7. To install bafƀe ſlters and stainless spacer(s), refer to Bafƀe Filters and Stainless Steel Spacers on Page 18 for
bafƀe ſlter and stainless spacer placement. Refer to Figure 9 for the following ſve steps:
Angle bafƀe ſlter toward back of hood.
Push bafƀe ſlter up until almost level.
Slide forward into recess behind the front of hood.
Lower bafƀe ſlter.
Slide back until it ſts into resting positions.
8. Repeat Step 7 to install all bafƀe ſlters and stainless spacers.
9.
Turn power ON in control panel. Check all lights and fan operations.
10. Make sure to leave this Installation Guide for the homeowner.
Figure 6 Figure 9
Figure 7
Figure 8
Installation (Continued) :
Page 11