Installation Guide

INSTALLATION:

Step 6 : Attaching the unit to the wall

•

Mark or drill a small hole on the mounting position according to the dimensions on the following drawings.

•

Insert suitable screws into the holes.

• Hang the range hood onto the screws.

• Method 1: attach the ducting to the top round 6" damper and exhaust outdoors.

•

The following drawings show the mounting dimensions of the 30" (750mm) width and the 36" (900mm) width.

Method 1: Attaching to the wall using 6" round top ( vertical) venting.

Method 2: Attaching the unit to the wall using rear rectangular ducting.

27 7/8 " (708 mm) or 33 3/8” (848 mm)

27 7/8 " (708 mm) ou 33 3/8” (848 mm)

Fig # 13

Fig #

• Method 2: attach the ducting to the rear rectangular damper and exhaust outdoors.