Installation Guide

• This range hood is factory set for venting through the roof or wall.

• Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.

IMPORTANT:

NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,

attics or garages. All exhaust must be ducted to the outside.

•

Use metal/aluminum duct work only.

•

Fasten all connections with sheet metal screws and tape all joints with certified aluminum or foil tape.

Please check the building codes in your city to learn which tape product is recommended

•

Use caulking to seal exterior wall or roof opening around the cap.

VENTING METHODS:

•