Manualshelf

Installation Guide

ManualsBrandsAncona ManualsUndercabinet Range Hoods30-in Ducted Stainless Steel Undercabinet Range Hood (Common: 30 Inch; Actual: 29.5-in)
11121314151617181920
— 14 —
Installation
STEP 12
Install Filters
To install lters follow these four steps (See Figure #7):
• Angle the lter into slots at the back of the hood.
• Push the button on handle of the lter.
• Release the handle once the lter ts into a resting position.
• Repeat to install all lters.
Cleaning Filters
IMPORTANT: Drain oil from bafes, spacers, lters, oil tunnels, oil containers before oil and residue overow!
• Removeallbafes,spacers,lters,greasetray,andoilcontainersanddiscardoilandresidue.
• Washwithwarmsoapywater.NOTE:Stainlesssteelbafes,spacersandoiltunnelaretoprackdishwashersafe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should lters wear out due to age and prolonged use, replace with a new lter.
Fig #7
Maintenance