Installation Guide

— 13 —
Installation
STEP 13
Install Upper Chimney
• Remove the protective lm from the upper chimney.
Carefully slide the upper chimney inside the lower
chimney.
• Extend the telescopic upper chimney until it reaches
the upper chimney bracket and attach the upper
chimney to the bracket using the provided screws.
• Peel off protective lm from the rest of the range hood.
STEP 14
Install Filters
• Holdthebafelterbythetwoknobs.
• Placethefrontofthebafeagainsttheinteriorfront
of the range hood.
• Slide it up and push the rear of the lter back until it
sits securely.
• Thebafelterschannelgreasereleasedbycooking
foodsintothegreasetraysandpreventamingfoods
on the cook top from damaging the inside of the
rangehood.Forthisreason,thebafeltersmust
ALWAYS be installed during range hood use.
• Thebafeltersandgreasetraysshouldbecleaned
once a month, or as needed. See page 18 for
cleaning instructions.
Align the upper chimney
bracket with the range hood
below.