Installation Guide

— 19 —
Maintenance
Replacing the Light Pucks
u
Make sure the range hood is unplugged or turn OFF
breaker.
v
Remove lters, push the spring, pull out the LED
puck and unplug it.
CAUTION: PUCK MAY BE HOT, PLEASE
TAKE OUT THE PUCK WHEN THE PUCK IS
COMPLETELY COOL!
w
Replace LED lights. Plug in new puck and push
back into light panel.
x
Turn ON breaker and range hood to test for
operation.
IMPORTANT:
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION
ON THE APPLIANCE.