User Manual

Table Of Contents

REPLACING THE BULBS:

Replacing the light bulbs:

• This range hood uses halogen bulbs: 20W 12V type G4.

• Make sure the range hood is unplugged or turn OFF breaker.

• Place a flat-head screwdriver between light cover and housing to remove cover.

• Gently pull defective bulb straight out and discard.

• Wear a cotton glove or use a cloth to handle the replacement bulb.

(DO NOT handle with bare fingers as this may shorten the life of the bulb).

Push gently but securely into light socket.

NOTE: DO NOT push too hard as bulb “legs” may break off.

• Replace light cover.

• Turn ON breaker and range hood to test for operation.