User guide

X-6
“A” ANCHORSPAN™ COMPONENT WEIGHTS & MEASURES
[ ] indicates items that stack easily
within each other’s shape
Part/Assembly Description Weight Dimensions Volume Packing Comments/Suggestions
Lbs. Ea. (Nominal) in cu. ft. (Dimensions are to widest points)
Base Column Assembly 140 4”x4’8”x17’9” [27.6} 4’8” is measured across the curve
Apex Assembly 130 4”x4’8”x14’7” [13] Stacks within the curve of base column
40’ Rafter Assembly 48 4”x7”x6’4” 2.8 Includes splice in male end
50’ Rafter Assembly 83 4”x7”x118” 2.3 Includes splice in male end
60’ Rafter Assembly 131 4”x7”x17’ 3.3 Includes splice in male end
Baseplate 38 18”x21”x6” [1] Sandwich 2 in space of approx. 1
Baseplate Adapter Bar 3.4 2’x2”x15’ 0.04 Pack in drum with other loose items
SpanLatch Purlin 26 3”x6”x15’4” 2.1 Protect latching ends
Double SpanLatch Purlins 27 3”x6”x15’4” 2.1 Protect latching ends
Purlin Bolt Assemblies 1.8 2”x2”x10” 0.02 Pack pre-assembled in drum
End Beam Blot Assemblies 2.4 2”x6”x10” 0.09 Pack pre-assembled in drum
Upright Bracket Bolt Assembly 2.7 3”x4”x10” 0.07 Pack pre-assembled in drum
Wing Eave Brackets 0.034 2”x2”x1” 0.003 Store with end beam bolt assemblies
Mid Eave Bars 15’ 29 2”x4”x14’11” 0.83 All eave bars stack well together
End Eave Bars 20’ 40 2”x4”x19’11” 1.1 All eave bars stack well together
Wing Eave Bar 10’ (Left) 18 2”x4”x8’10” 0.5 All eave bars stack well together
Wing Eave Bar 10’ (Right) 18 2”x4”x8’10” 0.5 All eave bars stack well together
Wing Eave Bar 15’ (Left) 29 2”x4”x13’9” 0.8 All eave bars stack well together
Wing Eave Bar 15’ (Right) 29 2”x4”x13’9” 0.8 All eave bars stack well together
Midwall Ground Bar 15’ 16 X”x1”x 15’3” 0.1 Easily strapped together in bundles
Endwall Ground Bar 20’ 22 X”x1”x 20’3” 0.14 Easily strapped together in bundles
Wingwall Ground Bar 10’ 10 X”x1”x 9’4” 0.06 Easily strapped together in bundles
Wingwall Ground Bar 15” 16 X”x1”x 14’4” 0.1 Easily strapped together in bundles
End Upright, Short 78 4”x7”x15’3” 3 (at shortest adj) Store fully assembled
End Upright, Long 108 4”x7”x21’8” 4.2 Store fully assembled
Bent Arm Pin 0.64 1”x1”x10” 0.004 Pack in drum with hair pin cotters
#10 Hair Pin Cotter 0.03 A“x1”x3” 0.0002 Pack installed on bent arm pins
Fabric Tensioning Winch 2.9 3”x4”x9” 0.07 Pack in drum or similar
42” Shoulder Hd. Steel Stakes 12.8 2”x2”x43” 0.13 Pack in drum or similar
24”x1” Steel Stakes 2.1 1Z”x1Z”x25” 0.02 Pack in drum or similar
End Center Bar, 40’ 5.1 2”x3”x9’3” 0.4 Stack with eave bars and ground bars
End Center Bar, 50’ 8.0 2”x3”x11’ 0.5 Stack with eave bars and ground bars
End Center Bar, 80’ 10.0 2”x3”x17’ 0.5 Stack with eave bars and ground bars
Cross-Cable/ Green 4.2 Coiled 0.4 Pack all together in drum or similar
Cross-Cable/ Red 4.1 Coiled 0.4 Pack all together in drum or similar
Cross-Cable/ Blue 4.7 Coiled 0.5 Pack all together in drum or similar
Stake Bar 2’ (3-holed) 5.4 2”x2”x2’ 0.06 Pack with loose hardware
Century Guy Winch 6.4 4”x4”x5” 0.05 Pack with loose hardware
AnchorS
pan Installation Kit: 15”x4”x20’ 8.3 Kit below shipped in 1 container
Long Purlin Hook 1X”x11”x20’ incl. Shipped included in installation kit above
Short Purlin Hook 1X”x11”x12’6” incl. Shipped included in installation kit above
Diagonal Beam Brace 2”x2”x17’3” incl. Shipped included in installation kit above
Beam Hook & Harness incl. Shipped included in installation kit above
Fabric Hook & Harness incl. Shipped included in installation kit above
Eave Bar Cradle incl. Shipped included in installation kit above
Eye Fittings for Gin Pole incl. Shipped included in installation kit above