Instructions / Assembly

7
Replacing Filter Cartridge
Cartridge Information:
Stage
Cartridge Model
# & Name
Web URL
Recommended
Maintenance Duration
Stage 1
Sediment
AF-1001
https://www.anchorf
ilters.com/products/
af-1001-sediment-
filter-cartridge
Depends on water
condition and should be
replaced at 3-6 months
interval
Stage 2
& 3
Carbon Block
AF-1000
https://www.anchorf
ilters.com/products/
anchor-af-1000-
carbon-block-
replacement-filter
Depends on water
condition and should be
replaced at 6 months
interval
This filter system contains replaceable components called
filter cartridges critical to efficiency of the system.
Replacement of these cartridges should be with one of
identical specifications to assure same efficiency and
contaminant reduction performance.
STEPS:
1. Shut off the feed water to the system by turning the knob on water
supply adapter clockwise until it stops.
2. Press down on faucet handle to relieve pressure.
3. Allow 2-3 minutes for pressure in the system to drop.
4. Remove the filter sumps with the housing wrench by turning the
sump to the left (counterclockwise). If the O- ring in the sump is
stretched or worn, it should be replaced to maintain a proper seal.
5. Remove the old filter and insert the new ones.
6. Replace the housing onto the cap by turning it to the right (clockwise)
until the O-ring makes firm contact. DO NOT OVER-TIGHTEN.
7. Turn on feed water to the system by turning the water supply adapter
knob counterclockwise.
8. Remember to flush the carbon fines.