Instructions / Assembly

After setting up the faucet, do the following:

1. Place the filter unit in a convenient location with the spout

positioned over your sink. The spout is designed to swivel.

2. Turn on your cold water and divert the water through the filter by

pulling out/turning the knob on the diverter valve.

3. Allow it to run for several minutes to flush out the normal carbon

fines (blackish specs). Initially, the water may contain tiny air

bubbles and taste slightly sweet - this is normal and harmless, and

will clear up after flushing.

Faucet with inside thread

- enclosed adapter ring and

gasket must be used

Countertop with filter installed

If your faucet has non-standard threads, try the

supplied universal adapter or purchase a special

adapter from your local hardware store.

4. To stop the

flow, either

turn the

diverter valve

knob back or

turn off the

cold water at

your faucet.