User's Manual

4
7 5
2
4
8
4 3
6 1
2
1. Power Button: Press for 2 seconds to power the microphone on or off
2. Power LED: Indicates the power/low battery level status.
1. Power Button: Press for 2 seconds to power the belt pack on or off.
2. Mute Button: With the transmitter on, a slight press of button will toggle between mute
and unmute function.
3. Power LED: Indicates the power/low battery level status.
4. MUTE LED: Blue LED light on means unit is in mute status.
5. SYNC Button: Press to actuate the synchronization process with the receiver.
6. LCD Display: Display channel number and battery power level.
7. Battery Compartment: Insert two AA dry or rechargeable batteries into the
compartment and make sure that the polarity of batteries is correct.
8. Mini XLR Connector: Connect to the lapel microphone or headset microphone.
9. Gain Switch: The switch sets the audio input to -20dB, -10dB, or 0dB.
3. Talk Button: Push the button up to talk.
4. SYNC Button: Press to actuate the synchronization process with the receiver
5. LCD Display: Display channel number and battery power level.
6. Battery Compartment: Insert two AA dry or rechargeable batteries into the compartment and make sure that the polarity of
the batteries is correct.
7. Grille: Protects the microphone capsule and helps reduce breath sounds and wind noise.
LED Indicator Status
Green Ready
Flashing Green The synchronization process is actuated
Flashing Red Low battery power with less than 10 minutes of operation left
LED Indicator Status
Green Ready
Flashing Green The synchronization process is actuated
Flashing Red Low battery power with less than 10 minutes of operation left
3
6
9
7
1
5
BASIC SYSTEM OPERATION - WH-EXT500
BASIC SYSTEM OPERATION - WB-EXT500