User manual

AMD2000 Series - Servo Drive - User Manual
86 DS619-0-00-0019 - Rev 0 ANCA Motion
m. If the firmware fails to update, there are a few possible things to
check:
I. AMD2000 is not powered on. Power-on the
AMD2000. Refer to Section 9.6 for details.
II. Ethernet cable between the AMD2000 and the PC
is not connected. Refer to Section 9.5 for details.
III. Network adaptor configuration is incorrect. Refer to
Section 9.4 for details.
IV. Try closing the MotionBench application and then
restarting.
V. Try power cycling the AMD2000.
VI. Try rebooting the PC.